• Single-, split-, and three-phase (Y and delta) power and energy logger
• 3 voltage channels and 3 current channels, with automatic sensor recognition
• Stock version (2137.54) includes 3 MiniFlex MA193-10-BK flexible AC current sensors
• Records to SD card: 8 GB installed, supports cards up to 32 GB
• Connectivity: USB, Ethernet, Wi-Fi access point (up to 5 clients), remote access and secure email via DataViewSync
• Compact and magnetized for mounting inside power panels
• Can be phase-powered with the PEL adapter (sold separately)

Free DataView software for configuration, data retrieval, real-time display, analysis, and reporting

• Predictive and preventive maintenance of electrical systems
• Energy audits and cost optimization
• Data center and IT infrastructure power monitoring
• Temporary power and energy logging in panels without a permanent meter

• Type: single-, split-, and three-phase power and energy logger, PEL 110 series
• Voltage channels: 3 (V1, V2, V3); current channels: 3, with automatic sensor recognition
• Current sensors included (2137.54): 3 MiniFlex MA193-10-BK flexible AC sensors
• Measurement quantities (voltage, current, power, energy, and related): to be confirmed from the PEL 112/113 manual specification tables
• Voltage and current ranges and accuracy: to be confirmed from the PEL 112/113 manual
• Storage: SD card, 8 GB installed, supports up to 32 GB
• Connectivity: USB, Ethernet, Wi-Fi access point (up to 5 clients), DataViewSync remote access and SMTP email
• Power: NiMH battery (installed) and 115 V power cord; optional phase power via PEL adapter (sold separately)
• Safety: CAT III and CAT IV rated (exact voltage ratings to be confirmed from datasheet); IP rating to be confirmed

Software: DataView (included)

The AEMC PEL 113 turns any panel into a logged measurement point. It handles single-phase, split-phase, and three-phase systems (Y and delta) with three voltage and three current channels, and recognizes the connected current sensors automatically. The stock configuration (Cat. #2137.54) includes three MiniFlex MA193-10-BK flexible AC current sensors, so it is ready to clamp and log out of the box.

Data goes to an SD card (8 GB installed, supports cards up to 32 GB), and you reach the logger over USB, Ethernet, or its own Wi-Fi access point (up to 5 clients), with remote access and secure email through DataViewSync. The unit is compact and magnetized to mount inside a power panel, and it can be powered directly from the phases with the PEL adapter (sold separately). AEMC rates it about five times faster than the PEL 103 for setup and data handling.

This is the logger for predictive and preventive maintenance, energy audits, cost optimization, and IT and data center infrastructure monitoring, where you need clean power and energy data over time without a permanent install.